NEC Univerge SV8100 - 84-26: IPL Basic Setup (DSP)

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 829
Description
Use Program 84-26 : IPL Basic Setup to set the IP address of IPL and the port.
Program 84 : Hardware Setup for VoIP
84-26: IPL Basic Setup (DSP)
Level:
IN
Index 1
Slot Number 1
VoIP GW Number 01~08
Item
No.
Item Input Data Default
01
IP Address
VoIP GW2~8 are
not used by IPLB.
Those addresses
are ignored by the
IPLB DSP.
xxx.xxx.xxx.xxx
Slot 1 = 172.16.0.20
:
Slot 4 = 172.16.0.44
VoIP GW Number 1~8:
172.16.0.20~172.16.16.0.27
02
RTP Port Number
RTP/RTCP port for
GW2~8 are not
used by IPLB.
0~65534
VoIP GW1 = 10020
VoIP GW2 = 10052
VoIP GW3 = 10084
VoIP GW4 = 10116
VoIP GW5 = 10148
VoIP GW6 = 10180
VoIP GW7 = 10212
VoIP GW8 = 10244
03
RTCP Port Number
RTP/RTCP port for
GW2~8 are not
used by IPLB.
RTP Port Number + 1
VoIP GW1 = 10021
VoIP GW2 = 10053
VoIP GW3 = 10085
VoIP GW4 = 10117
VoIP GW5 = 10149
VoIP GW6 = 10181
VoIP GW7 = 10213
VoIP GW8 = 10245