NEC Univerge SV8100 - Netlink System Individual Setting

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 643
Description
Use Program 51-02: NetLink System Individual Setting to set system data for each
NetLink system.
Program 51 : NetLink Service
51-02 : NetLink System Individual Setting
Level:
IN
Input Data
System ID 1~50
Item
No.
Item Input Data Default
01
System Name
This is the name given to each system.
Up to 20 characters.
blank
02
Time Zone (Hour)
Determines the time offset from the Primary
system.
(0 = -12, 1 = -11, 2 = -10.... 12 = 0
13 = +1, 14 = +2, 24 = +12)
This setting affects Time Display on MLT
(see 51-13-02).
0~24 (-12 ~ +12
hours)
12
03
Time Zone (Minute)
Determines the time offset from the Primary
system.
(0 = -60, 1 = -59, 2 = -58.... 120 = +60)
This setting affects Time Display on MLT
(see 51-13-02).
0~120 (-60 ~ +60)
60
04
Authenticate System MAC Address
To use this function, set PRG 51-13-03 to 1
(enable), NetLink systems will reject the
connection from unauthenticated system
access.
00-00-00-00-00-00~
FF-FF-FF-FF-FF-FF
00-00-00-00-00-00