NEC Univerge SV8100 - 10-12: CD-CP00 Network Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 25
Description
Use Program 10-12: CD-CP00 Network Setup to setup the IP Address,
Subnet-Mask, and Default Gateway addresses.
Caution! If any IP Address or NIC settings are changed, the system must be
reset for the changes to take affect.
Program 10 : System Configuration Setup
10-12: CD-CP00 Network Setup
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
IP Address
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
192.168.0.10 Set for CD-CP00
02
Subnet Mask
128.0.0.0
240.0.0.0
254.0.0.0
255.192.0.0
255.248.0.0
255.255.0.0
255.255.224.0
255.255.252.0
255.255.255.128
255.255.255.240
255.255.255.254
192.0.0.0
248.0.0.0
255.0.0.0
255.224.0.0
255.252.0.0
255.255.128.0
255.255.240.0
255.255.254.0
255.255.255.192
255.255.255.248
255.255.255.255
224.0.0.0
252.0.0.0
255.128.0.0
255.240.0.0
255.254.0.0
255.255.192.0
255.255.248.0
255.255.255.0
255.255.255.224
255.255.255.252
255.255.255.0 The setting of
Subnet Mask is
invalid when all
Host Addresses
are 0.
If the network
section is:
0,
127,
128.0,
191.255,
192.0.0,
223.255.255
The setting of
Subnet Mask is
invalid.
03
Default Gateway
0.0.0.0 ~ 126.255.255.254
128.0.0.1 ~ 191.254.255.254
192.0.0.1 ~ 223.255.255.254
0.0.0.0 IP Address for
Router.