NEC Univerge SV8100 - SIP Trunk Registration Information Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 57
Description
Use Program 10-36: SIP Trunk Registration Information Setup to set the SIP trunk
registration information.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-36 : SIP Trunk Registration Information Setup
Level:
IN
Input Data
Register ID 1~31
Input Data
Item
No.
Item Input Data Default
01
Registration
This setting determines if the SIP trunk information is
registered.
0 = Disable
1 = Enable
0
02
User ID
This sets the SIP trunk User ID.
Up to 32 Characters
None
03
Authentication User ID
This sets the SIP trunk Authentication User ID.
Up to 64 Characters
None
04
Authentication Password
This sets the SIP trunk authentication password.
Up to 32 Characters
None