NEC Univerge SV8100 - SIP Registrar;Proxy Information Basic Setup

Issue 10.1 UNIVERGE SV8100
2 - 56 Program 10 : System Configuration Setup
Description
Use Program 10-33 : SIP Registrar/Proxy Information Basic Setup to set the
registrar/proxy options for SIP extensions.
Conditions
None
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-33 : SIP Registrar/Proxy Information Basic Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Registration Expire Time
After this time expires, the UA’s are forced to
reregister with the CPU. This allows the CPU to keep
a current location of the entire end UA’s.
60 ~ 65535
3600
02
Authentication Mode
Check here if a password is desired for the IP SIP
phones to register. When checked, 15-05-16 must
have a password entered and also the SIP phone
must have the same password. When using
Authentication, the station number is the
authorization name.
0 = Disable
1 = Enable
0
03
Registrar/Proxy Domain Name
Set the domain name of the SIP proxy.
Up to 64 Characters
None
04
Registrar/Proxy Host Name
Set the domain name of the SIP proxy.
Up to 48 Characters
None
05
NAT Mode
Enable this Mode if the System controls the SIP
Phone by the NAT router.
0 = Disable
1 = Enable
0