UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 143
Description
Use Program 13-05: Speed Dialing Trunk Group to define the trunk group/route to
be seized for each Speed Dialing number.
If this program has an entry of 0 (no setting), then seizing a line follows the trunk
access group routing of the caller’s extension (refer to Program 14-06). This setting is
available only in External Speed Dialing Mode (Program 13-01-01).
Conditions
None
Feature Cross Reference
Speed Dial – System/Group/Station
Program 13 : Abbreviated Dialing
13-05: Speed Dial Trunk Group
Level:
SB
Input Data
Speed Dialing Bin Number 0000~1999
Item No. Trunk Group/Route Number Default
01 0~100 No Setting
To Next Page
Loading...
