UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 415
Description
Use Program 26-08: LCR Manual Override Access Code Table to define the
access codes that the users can dial to select an indirect carrier i.e. bypass the
automatic selection of Program 26-02.
Conditions
The override code must begin with a digit 1 or it will not be checked against this table.
There can are also exemptions to this table in Program 26-09.
Feature Cross Reference
Least Cost Routing
Program 26 : ARS Service & Least Cost Routing
26-08: LCR Manual Override Access Code Table
Level:
IN
Input Data
Manual Override Access Code Table Number 1-10
Item
No.
Item Input Data Default
01
Manual Override Code
This code is dialled by the user to bypass
the automatic selection.
Max 4 digits
(0-9,
, #)
No setting
02
Carrier Table No
The carrier table number of Program 26-
05.
Carrier Table number 1-25
0
To Next Page
Loading...
