NEC Univerge SV8100 - Answer Tables

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 19
Description
Use Program 10-05: General Purpose Relay Setup to define which Relay circuits
(5~8) on PGD Adapter are used for General Purpose Relay.
Input Data
Conditions
None
Feature Cross Reference
 Analog Communications Interface (ACI)
Program 10 : System Configuration Setup
10-05 : General Purpose Relay Setup
Level:
IN
General Purpose Relay No. 1~8
Item
No.
Item Input Data Default
01
Slot No.
Physical Port of DLCA Sensor Circuit No.
Slot No: 0~24
 After each entry, press
the Transfer Key to
advance to the next
entry.
0
Physical Port: 0~16
0
Relay No: 0, 5~8
0
02
Drive Timer Setup
0~64800
0 = No Setting
1 = 0.1s
2 = 0.2s
3 = 0.3s
:
10 = 1.0s
0