UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 897
Description
Use Program 90-36: Firmware Update Time Setting to define the data for the
firmware update feature. This data is available to set for the WebPro/PC
Programming FW update feature. A compact flash card must be inserted in the
CD-CP00 for this feature.
The following firmware is available to update with this feature:
main.bin
Dspdbu.bin
dsp.bin
Program 90 : Maintenance Program
90-36: Firmware Update Time Setting
Level:
IN
Item
No.
Item Display Data Default Description
01
Firmware Update
Schedule Time
Year: 0~99
0 Set the time to update the
firmware using a compact flash
card.
Time registration fails if an
expired time is registered.
Month: 0~12
0
Day: 00~31
0
Hour: 00~23
0
Minute: 00~59
0
02
Update mode
0 = Non Active
1 = Activated
0 Activate the Firmware Update
feature. If this setting is 1, new
firmware on the compact flash
card updates according to the
setting at 90-36-01.
03
Update Report
256 characters max.
- Output a report when the
update is executed and saves
one copy on the system.
If a new update occurs, the new
report overwrites the old report.
Refer to the Sample Report
shown.
To Next Page
Loading...
