NEC Univerge SV8100 - 34-05: Tie Line Outgoing Call Restriction

Issue 10.1 UNIVERGE SV8100
2 - 458 Program 34 : Tie Line Setup
Description
Use Program 34-05: Tie Line Outgoing Call Restriction to build a restriction matrix
for outgoing trunk calls placed from an inbound trunk (e.g., dialed from a Tie Line).
For each inbound trunk group, enable or disable access to each CO trunk group.
Conditions
None
Feature Cross Reference
 Tie Lines
Program 34 : Tie Line Setup
34-05: Tie Line Outgoing Call Restriction
Level:
IN
Input Data
Incoming Trunk Group Number 001~100
Outgoing Trunk Group Number 001~100
Item No. Item Input Data Default
01 Tie Line Outgoing Call Restriction
0 = Enable (Y-Tandem)
1 = Restricted (N-Tandem)
0