UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 327
Description
Use Program 21-11 : Extension Ringdown (Hotline) Assignment to define the
Hotline destination number for each extension number.
Conditions
The @ code is used to make an outbound call automatically to a DISA Trunk or to
VM Auto Attendant. This code can only be used on ISDN outbound calls. Internal
calls and analog outbound calls are not supported.
Feature Cross Reference
Ringdown Extension, Internal/External
Program 21 : Outgoing Call Setup
21-11 : Extension Ringdown (Hotline) Assignment
Level:
IN
Input Data
Extension Number Maximum eight digits
Item
No.
Hotline Destination Number Default
Related
Program
01 0,
, #, Pause, Hook Flash,
@ (Code to wait for answer supervision)
(maximum 24 digits)
No Setting 20-08-09
21-01-09
To Next Page
Loading...
