NEC Univerge SV8100 - Dial Block Restriction Class Per Extension

Issue 10.1 UNIVERGE SV8100
2 - 326 Program 21 : Outgoing Call Setup
Description
Use Program 21-10 : Dial Block Restriction Class Per Extension to define the Toll
Restriction Class to each extension when the extension is set for Dial Block
Restriction. If this data is 0, Toll Restriction Class follows Program 21-09-01.
Conditions
None
Feature Cross Reference
None
Program 21 : Outgoing Call Setup
21-10 : Dial Block Restriction Class Per Extension
Level:
IN
Input Data
Extension Number Maximum eight digits
Item No. Toll Restriction Class Default
01 0, 1~15
(0 = No Setting)
0 (No Setting)