Issue 10.1 UNIVERGE SV8100
2 - 920 Program 90 : Maintenance Program
Description
Use Program 90-58: Restore Recovery Data to select the recovery data stored in
the flash memory of the CD-CP00. After this command is executed, the system
restarts automatically.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-58: Restore Recovery Data
Level:
SA
Input Data
Data ID 1~5
Item No. Item Input Data
01
Restore Recovery Data
[Restore & Reset?]: Dial 1+ press Transfer
(Press Transfer to cancel.)
To Next Page
Loading...
