Issue 10.1 UNIVERGE SV8100
2 - 228 Program 15 : Extension, Basic Setup
Description
Use Program 15-24 : Registration of Standard SIP Terminal to register data in the
standard SIP terminal where Register is not used.
Conditions
None
Feature Cross Reference
None
Program 15 : Extension, Basic Setup
15-24 : Registration of Standard SIP Terminal
Level:
IN
Item
No.
Item Input Data Default Related PRG
01
Using IP Address
IP Address of the standard SIP
terminal that is used as the SIP
extension. When Program 15-24-
03 is set to 1, this Program cannot
be changed from 0.0.0.0 (except
using PCProgramming).
0.0.0.0~255.255.255.255
0.0.0.0 PRG15-05-07
PRG15-05-18
02
Call Procedure Port
Call procedure port of the
standard SIP terminal that is used
as SIP extension.
0~65535
5060 PRG15-05-09
03
Registration Setting when
REGISTER isn’t used
Enables or disables the
Registration method. An error will
occur if Program 15-24-01 is
0.0.0.0 and this Program is set to
1 (except using PCProgramming).
0 = Disable
1 = Enable
0 PRG15-05-01
PRG15-05-18
To Next Page
Loading...
