UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 437
Description
Use Program 31-02 : Internal Paging Group Assignment to assign extensions to
Internal Paging Groups (i.e., Page Zones). The setting in this program also
determines if the Internal Page Group can receive Internal All Call Paging. The
system can have up to 64 paging groups. An extension can be in only one Internal
Paging Group.
Conditions
None
Feature Cross Reference
Paging, Internal
Program 31 : Paging Setup
31-02 : Internal Paging Group Assignment
Level:
IN
Input Data
Extension Number Maximum 8 digits
Item
No.
Item Input Data Default
01
Internal Paging Group Number
Assign extensions to Internal Paging Groups
(i.e., Page Zones). The system allows up to
64 Internal Paging Groups. An extension
can be in only one Internal Paging Group.
0~64
(0 = No Setting)
All stations: 0 (OT)
All stations: 1 (AU)
02
Internal All Call Paging Receiving
Allow or prevent All Call Internal Paging for
each extension. If allowed, extension can
place and receive All Call Internal Paging
announcements. If prevented, extensions
can only make (not receive) All Call Internal
Paging announcements. If combined,
Paging zones should be restricted as well,
change the internal page zone group in
Program 31-07-01 to 0.
0 = Off
1 = On
0 (OT)
1 (AU)
To Next Page
Loading...
