NEC Univerge SV8100 - Trunk Group Routing for DISA

Issue 10.1 UNIVERGE SV8100
2 - 398 Program 25 : VRS/DISA Setup
Description
Use Program 25-10: Trunk Group Routing for DISA to assign the Trunk Group
route chosen when a user places a DISA call to the system and dials 9. Set Trunk
Group Routing in Program 14-06. Enable or disable the DISA caller ability to dial 9 in
Program 20-14-02. Assign a route to each DISA Class of Service (1~15). The system
assigns a DISA Class of Service to a call based on the password the DISA caller
dials.
When programming, make a separate entry for each Night Service Mode.
Conditions
None
Feature Cross Reference
 Direct Inward System Access (DISA)
Program 25 : VRS/DISA Setup
25-10 : Trunk Group Routing for DISA
Level:
IN
Input Data
DISA User Number 1~15
Day/Night Mode 1-8
Item No. Item Input Data Default
01 Route Table Number 0~100
(0 = No Setting)
1