NEC Univerge SV8100 - 90-54: Pc;Web Programming

Issue 10.1 UNIVERGE SV8100
2 - 916 Program 90 : Maintenance Program
Description
Use Program 90-54: PC/Web Programming sets parameters for PC and Wed
Programming.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-54: PC/Web Programming
Level:
IN
Item
No.
Item Input Data Default
01
Web Pro TCP port number
The port number of TCP of the Web
programming is set. The port number
of new TCP is not reflected from the
Web Pro to the logout of all users of
the Web Pro who is logging in the
system after data is changed in the
setting.
1-65535
80
02
PC Pro TCP port Number
The port number of TCP of the PC
programming is set. The port number
of new TCP is not reflected from the
PCPro to the logout of all users of the
PCPro who is logging in the system
after data is changed in the setting.
1-65535
8000