NEC Univerge SV8100 - IP System Operation Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 45
Description
Use Program 10-26 : IP System Operation Setup to enable or disable the Peer to
Peer feature for SIP MLT and SIP IP stations.
Conditions
 Disabling 10-26-04 results in SIP MLT Station-to-SIP MLT Station calls using a
DSP resource.(V2.0 or higher)
 SIP-to-SIP MLT Station does not support Peer to Peer function and will result in
using a DSP resource.(V1.0)
 Disabling 10-26-03 results in SIP IP Station-to-SIP IP Station calls using a DSP
resource.
Feature Cross Reference
None
Program 10 : System Configuration Setup
10-26 : IP System Operation Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Peer to Peer Mode
0 = Off
1 = On
1
02
RTP Forwarding Mode
0 = Disable
1 = Enable
0
03
SIP Peer to Peer Mode
0 = Off
1 = On
1
04
DT700 Peer to Peer Mode
0 = Off
1 = On
1
05
SIP CTI Mode (OT)
When SIP CTI Mode is set as 1 (Mode1)
it will ignore the setting at 10-26-03
0 = Disable
1 = Mode1
0