NEC Univerge SV8100 - 11-20: Dial Extension Analyse Table

Issue 10.1 UNIVERGE SV8100
2 - 126 Program 11 : System Numbering
Description
Use Program 11-20: Dial Extension Analyze Table to define the dial type based on
three or more digits. This program is relevant only if digits in 11-01-01 are set to 9
(Dial Extension Analyze).
Conditions
 When the system uses the Dial Extension Analyze Table to determine the dial
type, the lower table has priority. For example, if Table 1 has 211 defined and
Table 2 has 2113 defined, Table 1 is used to determine the dial type.
Feature Cross Reference
None
Program 11 : System Numbering
11-20: Dial Extension Analyse Table
Level:
IN
Input Data
Dial Extension Analyze Table 01~128
Item
No.
Dial Extension Analyze Table Default
Related
Program
01 Dial (Up to eight digits: 0, 1~9, #,
Q, @) No Setting 11-01
02 Type of Dials:
0 = Not used
1 = Service Code
2 = Extension Number
5 = Operator Access
6 = F-Route Access
0 11-01