Programming Manual 1 - 1
Introduction
1Introduction
SECTION 1 BEFORE YOU START PROGRAMMING
This chapter provides you with detailed information about the system
programs. By changing a program, you change the way the feature
associated with that program works. In this chapter, you find out about
each program, the features that the program affects and how to enter the
program data into system memory.
This Manual is created for Australia and General Overseas. Some of the
features and programs apply only to certain regions. Features marked with
(AU) apply only for Australia. Features marked with (OT) apply for General
Overseas.
SECTION 2 HOW TO USE THIS MANUAL
This section lists each program in numerical order. For example, Program
10-01 is at the beginning of the section and Program 92-01 is at the end.
The information on each program is subdivided into the following
headings:
Description describes what the program options control. The Default
Settings for each program are also included. When you first install the
system, it uses the Default Setting for all programs. Along with the
Description are the Conditions which describe any limits or special
considerations that may apply to the program.
Before customizing your system be sure to read this chapter
first.
To Next Page
Loading...
