UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 5
Description
Use Program 10-03 : ETU Setup to setup and confirm the Basic Configuration data
for each blade. When changing a defined terminal type, first set the type to 0 and then
plug the new device in to have the system automatically define it or you may have to
reseat the blade.
The items highlighted in gray are read only and cannot be changed.
Input Data
For CNF PKG Setup
For DLCA PKG Setup
Program 10 : System Configuration Setup
10-03 : ETU Setup
Level:
IN
Physical Port Number 01~16
Item
No.
Item Input Data Default
02
Logical Port Number
0~256 0
Physical Port Number 01~16
Item
No.
Item Input Data Default
01
Terminal Type (B1)
0 = Not set
1 = Multiline Terminal
2 = SLT Adapter (OT)
3 = Bluetooth Cordless Handset
6=
PGD Adapter (Paging)
7=
PGD Adapter (Tone Ringer)
8=
PGD Adapter (Door Box)
9=
PGD Adapter (ACI)
10 = DSS Console
11 = --- Not Used ---
0
To Next Page
Loading...
