NEC Univerge SV8100 - 82-11: LCA Initial Data Setup (AU)

Issue 10.1 UNIVERGE SV8100
2 - 752 Program 82 : Basic Hardware Setup for Extension
Description
Use Program 82-11: LCA Initial Data Setup to define the various timers for LCA
Packages.
Conditions
None
Feature Cross Reference
None
Program 82 : Basic Hardware Setup for Extension
82-11: LCA Initial Data Setup (AU)
Level:
IN
Input Data
Ite
m
No
.
Item Description Input Default
01
Bounce Protect
Time
Specify a time for detection
of a valid off-Hook indication
that is long enough to
prevent an unintentional
bounce of the receiver from
being detected as a new Off-
Hook indication from a Single
Line Telephone.
0 = No Setting
1~15 = 100ms~1.5sec
3 (300ms)
02
HookFlash Start
Time
Specify the minimum
hookflash time from a Single
Line Telephone or analog
Voice Mail system before it is
detected as the beginning of
a valid hookflash.
0 = 40ms
1~15 = 90ms~790ms
0 (40ms)
03
HookFlash End
Time
Specify the maximum
hookflash duration from a
Single Line Telephone to
receive a second dial tone.
0 = HST+0ms
1~15 =
HST+100ms~HST+1500
ms (HST=Hookflash
Start Time)
1 (1600ms)