NEC Univerge SV8100 - Hotel Room Status Printer

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 523
Description
Use Program 42-05: Hotel Room Status Printer to set the CTA port to output the
Hotel Data (Check-Out sheet, Room Status, etc.) and the output options for the Hotel/
Motel feature.
Conditions
 Room Status Reports output via a CTA or CTU adapter require a DTH terminal
and a compatible external device.
 Room Status Reports can be output via LAN port, or when using DTH terminals, a
CTA or CTU adapter and a compatible external device.
Feature Cross Reference
 Hotel/Motel
Program 42 : Hotel Setup
42-05 : Hotel Room Status Printer
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Output Port Type
0 = No Setting
1=CTA
3=LAN
0
02
Output Destination Number
Up to eight digits
(Extension number which CTA/CTU is
equipped)
No Setting
03
Wake Up Call No Answer Data
0 = Not Output
1 = Output
0
04
Check-Out Sheet
0 = Not Output
1 = Output
0
05
PMS Protocol type
0=Normal
1 = Fidelio
0