NEC Univerge SV8100 - 85-02: ETIA VLAN Setup (AU)

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 849
Description
Use Program 85-02: ETIA VLAN Setup to define the VLAN setup for each ETIA
blade. The CHS2U can support up to 16, 802.1q VLANs (numbered 1 ~ 16). Program
Block 85-02 assigns supported VLAN IDs, with a range of 1 ~ 4095.
At default, 802.1q support is disabled. If Program Block 85-02-01 is set to ENABLE,
802.1q VLAN tagging is supported.
85-02-02 through 85-02-09 establish the default VLAN for ports 1 ~ 8 of the ETIA.
Program 85 : Hardware Setup for ETIA Switch
85-02: ETIA VLAN Setup (AU)
Level:
IN
Input Data
Hub Slot 1~24
Item No. Item Input Data Default
01
VLAN Mode
0 = Disable
1 = Enable
0
02
Port 1 VLAN ID
1~4095
1
03
Port 2 VLAN ID
1~4095
1
04
Port 3 VLAN ID
1~4095
1
05
Port 4 VLAN ID
1~4095
1
06
Port 5 VLAN ID
1~4095
1
07
Port 6 VLAN ID
1~4095
1
08
Port 7 VLAN ID
1~4095
1
09
Port 8 VLAN ID
1~4095
1