NEC Univerge SV8100 - 51-14: Netlink System Control

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 659
Description
Use Program 51-14: NetLink System Control to delete system and slot information.
(This program is available only via telephone programming and not through PC
Programming).
Conditions
None
Feature Cross Reference
None
Program 51 : NetLink Service
51-14: NetLink System Control
Level:
IN
Input Data
System ID 1~50
Menu Number 1 = System information deletion
Item
No.
Item Input Data Default
01
Delete System Information
This command is used to delete system information and
the slot information. The system must be disconnected.
1~50
1