NEC Univerge SV8100 - Program 24: Hold;Transfer Setup; System Options for Hold

Programming Manual 2 - 377
Program
24
Description
Use Program 24-01 : System Options for Hold to define the system options
for the Hold feature.
Program 24 : Hold/Transfer Setup
24-01 : System Options for Hold
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
PRG
01
Hold Recall Time
A call on Hold recalls the extension that
placed it on Hold after this time. This
time works with the Hold Recall Callback
Time (Item 2).
0~64800s
90
02
Hold Recall Callback Time
A trunk recalling from Hold or Park rings
an extension for this time. This time
works with Hold Recall Time or Park
Hold Time. After this time, the system
invokes the Hold recall time again.
Cycling between time 01 and 02 and 06
and 07 continues until a user answers
the call.
0~64800s
30 (OT)
0 (AU)
03
Exclusive Hold Recall Time
A call left on Exclusive Hold recalls the
extension that placed it on Hold after this
time.
0~64800s
90
04
Exclusive Hold Recall Callback Time
An Exclusive Hold Recall rings an
extension for this time. If not picked up,
the call goes back on System Hold.
0~64800s
30 (OT)
0 (AU)
05
Forced Release of Held Call
Depending on the setting of Program
14-01-16, the system disconnects calls
on Hold longer than this time.
0~64800s
64800 (OT)
1800 (AU)
14-01-16