NEC Univerge SV8100 - 30-02: DSS Console Extension Assignment

Issue 10.1 UNIVERGE SV8100
2 - 422 Program 30 : DSS/DLS Console Setup
Description
Use Program 30-02: DSS Console Extension Assignment to identify which
extensions have DSS Consoles connected.
 Up to 32 different extensions with DSS Consoles can be set up. A single extension
can have up to four 60-button DSS Consoles (32 is the maximum allowed per
system).
When programming, each extension/DSS Console(s) combination is called a Console
Number. There are 32 Console Numbers (1~32). Console Numbers can be assigned
to extensions. When entering data, the assignment for Console Number 1 is normally
made first.
Conditions
None
Feature Cross Reference
 Direct Station Selection (DSS) Console
Program 30 : DSS/DLS Console Setup
30-02: DSS Console Extension Assignment
Level:
IN
Input Data
60-button DSS Console Number 01~32
Item
No.
Item Default
01
Extension Number
The extension number for the multiline terminal connected with the
DSS console (up to eight digits).
No Setting