Issue 10.1 UNIVERGE SV8100
2 - 522 Program 42 : Hotel Setup
Description
Use Program 42-04: Hotel Mode One-Digit Service Codes to set up the Hotel
Mode one-digit service codes which are assigned in 42-02-01. For each Department
Calling Group (1~64), you enter the destination for each single digit code (1~9, 0,
,
#). The destination can be any code with up to four digits, such as an extension
number or access code.
Conditions
The one-digit service codes you assign in this program wait until the interdigit time
expires before executing.
Feature Cross Reference
Hotel/Motel
Program 42 : Hotel Setup
42-04 : Hotel Mode One-Digit Service Codes
Level:
IN
Input Data
Department (Extension) Group Number 01~64
Received Dial 1~9,0,
,#
Item No. Item Input Data Default
01
Destination Number
Up to eight digits No Setting
To Next Page
Loading...
