NEC Univerge SV8100 - 47-20: Station Mailbox Message Notification Options

Programming Manual 2 - 447
Program
32
Description
Use Program 32-01: Door Box Timers Setup to assign the timers used for
the Door Box.

The Door Box feature is called Door Phone when programming via
WebPro and using a multiline terminal.
Conditions
None
Feature Cross Reference
 Door Box
Program 32 : Door Box and Sensor Setup
32-01: Door Box Timers Setup
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Door Box Answer Time
A multiline terminal user must answer Door Box chimes
during this time.
0~64800
(sec)
30
02
Door Lock Cancel Time
When a single line telephone user hook flashes or a
multiline user presses the Recall key while talking to a
Door Box, the strike stays open for this time.
0~64800
(sec)
10
03
Off-Premise Call Forward by Door Box Disconnect
Timer
Define the conversation period for an Off-Premise Call
Forward by Door Box call. When this timer expires, the
caller hears busy tone for three seconds (fixed time), and
the call is then disconnected.
0~64800
(sec)
60