NEC Univerge SV8100 - 34-09: ANI;DNIS Service Options

Issue 10.1 UNIVERGE SV8100
2 - 462 Program 34 : Tie Line Setup
Description
Use Program 34-09: ANI/DNIS Service Options to define the ANI//DNIS service
option setup for E&M Class of Service.
Program 34 : Tie Line Setup
34-09: ANI/DNIS Service Options
Level:
IN
Input Data
Class of Service 01~15
Item
No.
Name Input Data
Default Default
Related
Program
COS 1
COS
2~15
01
Receive Format
Use this option to specify the format
of the ANI/DNIS data received from
the telco. Make sure your entry is
compatible with the service the telco
provides. The character  indicates a
delimiter.
 If PRG34-01-02 is selected to 2
(MF), this PRG works only as 4
=*ANI*DNIS*.
0 = Address
1 =
ANI
2 = DNIS
3 = ANIAddress
4 = ANIDNIS
5 = DNISANI
( = Delimiter Code)
0 0 34-01-02
34-09-02
02
Delimiter Dial Code
This option defines the character
Telco uses as a delimiter (see entries
1~5 in Item 1 above). Valid entries
are 0~9,
#, and .
1~9, 0, #, 

34-09-01
03
Route Setup of Receive Dial
This option specifies the source of
the data the system uses to route
incoming ANI/DNIS calls. If option 2
is selected, refer to Program 34-09-
04.
0 = Fixed Route (Item
08) (No Routing)
1 = Routes on
Received DNIS or
Address Data
2 = Routes on
Received ANI
Data
0 0 22-09-01
22-11-01
34-09-04
34-09-08