UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 663
Description
Use Program 51-17: NetLink DT700 Server individual Information Setting to set
the information of DT700 Server on each system in NetLink.
.
Conditions
Make sure TCP/UDP port doesn't interfere with other IP Terminal. Exception with
10-46-06, 10-46-13.
If 10-46-14 is ON make sure it wont have a same IP Address in the same
Network.
When the 51-01-01 is 0 this program will be ignored. Instead it will use 10-46-13.
Feature Cross Reference
None
Program 51 : NetLink Service
51-17:NetLink DT700 Server Individual Information Setting
Level:
IN
Input Data
System ID
1 -50
Input Data
Item
No.
Item Input Data Default
01
Register Port
0~65535
5080
02
Subscribe Session Port
0~65535
5081
To Next Page
Loading...
