NEC Univerge SV8100 - Service Code Setup (for Hotel)

Issue 10.1 UNIVERGE SV8100
2 - 118 Program 11 : System Numbering
Description
Use Program 11-14: Service Code Setup (for Hotel) to customize the Service
Codes which are used with the Hotel/Motel feature. You can customize additional
Service Codes in Programs 11-10 ~ 11-13, 11-15 and 11-16. The Service Codes can
be used only at telephones registered as hotel terminals in Program 42-02.
The following chart shows:
 The number of each code (01~18).
 The function of the Service Code.
 The type of telephones that can use the Service Code.
 The default entry.
Program 11 : System Numbering
11-14 : Service Code Setup (for Hotel)
Level:
IN
Input Data
Item
No.
Item Terminals
Default
(OT)
Default
(AU)
01
Set DND for Own Extension
MLT, SLT 727 627
02
Cancel DND for Own Extension
MLT, SLT 728 628
03
Set DND for Other Extension
MLT, SLT 729 629
04
Cancel DND for Other Extension
MLT, SLT 730 630
05
Set Wake Up Call for Own Extension
MLT, SLT 731 631
06
Cancel Wake Up Call for Own Extension
MLT, SLT 732 632
07
Set Wake Up Call for Other Extension
MLT, SLT 733 633
08
Cancel Wake Up Call for Other Extension
MLT, SLT 734 634
09
Set Room to Room Call Restriction
MLT, SLT 735 635
10
Cancel Room to Room Call Restriction
(Hotel)
MLT, SLT 736 636
11
Change Toll Restriction Class for Other
Extension
MLT, SLT 737 637
12
Check-In
MLT, SLT 738 638