NEC Univerge SV8100 - ARS Class of Service for Netlink (DT700)

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 419
Description
(This program is aviable for V7000 or higher)
Use Program 26-13 : ARS Class of Service for NetLink (DT700) sets an
extension’s ARS Class of Service when used for NetLink. Automatic Route Selection
uses ARS Class of Service when determining how to route an extension’s calls.
Conditions
 Only when NetLink is enabled.
Feature Cross Reference
None
Program 26 : ARS Service & Least Cost Routing
26-13 : ARS Class of Service for NetLink (DT700)
Level:
IN
Input Data
Extension Number Up to eight digits
Day/Night Mode 1-8
Item No. Item Input Data Default
01
Class of Service
0~16 0