UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 941
Description
Use Program 92-07 : Delete Command to delete the data of each extension number
of each extension group or each table.
The following table lists Programs that use the Delete Command function.
Program 92 : Copy Program
92-07 : Delete Command
Level:
IN
Input Data
Program Number XX-XX
Item
No.
Item Input Data
01
Destination Number (From)
Each extension port = 1~512 (PGM 11-02)
Each virtual extension port = 1~256 (PGM 11-04)
Each ACI port number = 1~96 (PGM 11-06)
Each extension group = 1~64 (PGM 11-07)
Each ACI group = 1~16 (PGM 11-08)
Each ACD group = 1~64 (PGM 11-17)
02
Destination Number (To)
Program Number Program Name
11-02 Extension Numbering
11-04 Virtual Extension Numbering
11-06 ACI Extension Numbering
11-07 Extension (Department) Group Pilot Number
11-08 ACI Group Pilot Number
11-17 ACD Group Pilot Number
To Next Page
Loading...
