NEC Univerge SV8100 - Program 26: ARS Service & Least Cost Routing; Automatic Route Selection Service

Programming Manual 2 - 405
Program
26
Description
Use Program 26-01: Automatic Route Selection Service to define the
system options for Automatic Route Selection (ARS).
Program 26 : ARS Service & Least Cost Routing
26-01 : Automatic Route Selection Service
Level:
IN
Input Data
Item
No.
Trunk Access Code Description Default
Related
PRG
01
ARS Service
Enable or disable ARS.
0 = Disable
(Off)
1 = Enable (On)
0 26-02
26-03
26-04
02
Network Outgoing InterDigit ARS
Time
With Networking, this time replaces
20-03-04 when determining if all
network protocol digits have been
received. If ARS is enabled at Site
B, this time can be programmed for
5 (500ms) at Site A. If ARS is
disabled and Site B is using F-
Route for outbound dialing, this time
should be programmed for 30 (three
seconds) at Site A.
0~64800 (sec)
30 20-03-04
03
ARS Misdialed Number Handling
If a user dials a number not
programmed in ARS, this option
determines if the system should
route over Trunk Group 1 or play
error tone.
0=Route to
Trunk
Group 1
1=Play
Warning
Tone to
Dialer
0 21-02
04
LCR Mode Option (OT)
0 = UK style
1=Not UK
style
0 26-02
26-05
26-06
26-07
26-08
26-09