NEC Univerge SV8100 - Program 10: System Configuration Setup; Time and Date

Programming Manual 2 - 3
Program
10
Description
Use Program 10-01: Time and Date to change the system Time and Date
through system programming. Extension users can also dial Service Code 828
(OT)/ 728 (AU) to change the time if allowed by an extension Class of Service.
Conditions
None
Feature Cross Reference
 Clock/Calendar Display
Program 10 : System Configuration Setup
10-01 : Time and Date
Level:
SA
Input Data
Item
No.
Item Input Data Default Description
01
Year
07~96 No Setting Enter 2 digits for year (07~96).
02
Month
01~12 No Setting Enter 2 digits (01~12) for the
month.
03
Day
01~31 No Setting Enter 2 digits (01~31) for the day.
04
Week
1~7
(Sun~Sat)
No Setting Enter digit for the day of the week
(1=Sunday, 7=Saturday).
05
Hour
00~23 No Setting Enter 2 digits for the hour (00~23).
06
Minute
00~59 No Setting Enter 2 digits for the minute
(00~59).
07
Second
00~59 No Setting Enter 2 digits for the second
(00~59).