NEC Univerge SV8100 - SECTION 3 PROGRAM 15 EXTENSION, BASIC SETUP

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 347
Description
Use Program 22-04: Incoming Extension Ring Group Assignment to assign
extensions to Ring Groups. Calls ring extensions according to Ring Group
programming. Use Program 22-05 to assign trunks to Ring Groups and use Program
22-06 to set the ringing for the phones.

There are 100 available Ring Groups.
Default
 Only Group01 has 200. (OT)
 Group01 has 101, 102, 103, 104, 105, 106, 107, and 108 (First 8 ports ringing)
(AU)
Conditions
None
Feature Cross Reference
 Ring Groups
Program 22 : Incoming Call Setup
22-04: Incoming Extension Ring Group Assignment
Level:
SA
Input Data
Incoming Ring Group Number 1~100
IRG Member Number 1 ~ 32
Item
No.
Item Input Data Default
Related
Program
01
Extension Number
Use this program to assign
extensions (up to 32) to Ring
Groups. Calls ring extensions
according to Ring Group
programming.
Maximum eight Digits
See Below
22-02
22-05
22-06