NEC Univerge SV8100 - Incoming Virtual Extension Ring Tone Order Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 213
Description
Use Program 15-10 : Incoming Virtual Extension Ring Tone Order Setup to set
the priority (1~4) for the Virtual Extension Ring Tones set in Program 15-08. When
Virtual Extension calls ring an extension simultaneously, the tone with the highest
order number (e.g., 1) rings. The other keys only flash. There are 256 Virtual
Extension ports.
Default
 By default, Virtual Extension ring tones have the following order:
Program 15 : Extension, Basic Setup
15-10 : Incoming Virtual Extension Ring Tone Order Setup
Level:
SA
Input Data
Extension Number Up to eight digits
Item
No.
Priority
Order
Data Description
Related
Program
01 1~4
0 = Tone Pattern 1
1 = Tone Pattern 2
2 = Tone Pattern 3
3 = Tone Pattern 4
4 = Incoming Extension
Ring Tone
When two or more virtual
extensions are set on a
function key on the telephone,
and the tone pattern by which
the sound of each extension
differs, the priority of ring
sound is set up.
15-08
Priority Order Ring Tone (Set in Program 15-08)
1 0 (Tone Pattern 1)
2 1 (Tone Pattern 2)
3 2 (Tone Pattern 3)
4 3 (Tone Pattern 4)