NEC Univerge SV8100 - Service Code Setup (for Service Access)

Issue 10.1 UNIVERGE SV8100
2 - 112 Program 11 : System Numbering
Description
Use Program 11-12 : Service Code Setup (for Service Access) to customize the
Service Codes which are used for service access. You can customize additional
Service Codes in Programs 11-10, 11-11, and 11-13 through 11-16.
The following chart shows:
 The number of each code (01~59).
 The function of the Service Code.
 The type of telephones that can use the Service Code.
 The default entry. For example, dialing (Item 05) cancels a previously set Camp-On.
 Programs that may be affected with the changing the code.
Program 11 : System Numbering
11-12 : Service Code Setup (for Service Access)
Level:
IN
Input Data
Item
No.
Item Terminals
Default
(OT)
Default
(AU)
Related
Program
01
Bypass Call
Activating Call Forwarding/Do Not Disturb
Override. This code is available only if you
disable the voice mail Single Digit dialing
code in Program 11-16-09.
MLT, SLT 807 707 11-16-09
02
Conference
MLT, SLT 826 #1
03
Override (Off-Hook Signaling)
MLT, SLT 809 709
04
Set Camp-On
MLT, SLT 850 750
05
Cancel Camp-On
MLT, SLT 870 770
06
Switching of Voice Call and Signal Call
MLT, SLT 812 712
07
Step Call
MLT, SLT 808 708
08
Barge-In
MLT, SLT 810 710
09
Change to STG (Department Group) All
Ring
MLT, SLT 780 No
Setting
16-02
10
Station Speed Dialing
MLT, SLT 813 #2