Issue 10.1 UNIVERGE SV8100
2 - 216 Program 15 : Extension, Basic Setup
Description
Use Program 15-12 : Conversation Recording Destination for Extensions to set
the ACI Conversation Recording destination for each extension.
If both Programs 14-09 and 15-12 define a destination, the destination in Program
15-12 is followed.
Conditions
None
Feature Cross Reference
Analog Communications Interface (ACI)
Program 15 : Extension, Basic Setup
15-12 : Conversation Recording Destination for Extensions
Level:
IN
Input Data
Extension Number Maximum eight digits
Item
Number
Item Input Data Default
01
ACI Recording Destination Extension Number
Enter the ACI extension number to which the trunk
calls should be recorded.
Maximum eight
digits
No Setting
02
ACI Automatic Recording for Incoming Calls
Determine if an extension incoming calls should be
automatically recorded to the ACI.
0=Off
1=On
0
04
ACI Automatic Recording for Outgoing Calls (OT)
Determine if an extensionÅfs outgoing calls should
be automatically recorded to the ACI.
0=Off
1=On
0
To Next Page
Loading...
