NEC Univerge SV8100 - Program 15: Extension, Basic Setup; Basic Extension Data Setup

Programming Manual 2 - 173
Program
15
Description
Use Program 15-01 : Basic Extension Data Setup to define the basic
settings for each extension.
Program 15 : Extension, Basic Setup
15-01 : Basic Extension Data Setup
Level:
SA
Input Data
Extension Number Maximum eight digits
Item
No.
Item Input Data Default
Related
Program
01
Extension Name
Define the extension/
virtual extension name.
Up to 12 Characters
Up to 6 Chinese
Characters (OT)
 To use Chinese
Characters use PC
Pro or WebPro (OT)
Ext.200 = STA 200
(OT)
Ext.101 = STA 101
(AU)
02
Outgoing Trunk Line
Preference
Use this option to set
the extension outgoing
Trunk Line Preference.
If enabled, the
extension user receives
trunk dial tone when
they lift the handset.
The user hears trunk
dial tone only if allowed
by Trunk Access Map
programming
(Programs 14-07 and
15-06). Refer to the
Line Preference feature
for more details.
0=Off
1=On
0 14-06
21-02
03
SMDR Printout
Use this option to
include or exclude the
extension in the SMDR
report.
0 = Do not print on
SMDR report
1 = Include on SMDR
report
1