NEC Univerge SV8100 - System Options for Multiline Telephones

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 239
Description
Use Program 20-02 : System Options for Multiline Telephones to set various
system options for multiline telephones.
Program 20 : System Option Setup
20-02 : System Options for Multiline Telephones
Level:
IN
Input Data
Item
No.
Item Input Data Default
Related
Program
01
Trunk Loop Key
Operation Mode (OT)
0 = Keep Lamp
1 = Extinction
0
Mode 0 = Keep
Lamp
1 = LED Off
Incoming: 300 IPM Red blink
Talking: Green Light-
ing (on
Talking TEL)
LED Off
Holding: 60 IPM Green
blink (on
holding TEL)
LED Off
02
Trunk Group Access
Key Operating Mode
Use this option to set
the operating mode of
the extension trunk
group keys. The keys
are for incoming
access, outgoing
access, or both.
0 = Outgoing / Incoming
1 = Outgoing
2=Incoming
0
03
BLF Control (OT)
Set the conditions
under which a Hotline,
Reverse Voice Over or
DSS Console key
indicates that an
extension is busy.
Refer to the Reverse
Voice Over feature for
more information.
0 = Idle / Busy (ON/OFF)
1 = Busy / Idle (ON/OFF)
1