Issue 10.1 UNIVERGE SV8100
2 - 412 Program 26 : ARS Service & Least Cost Routing
Description
Use Program 26-05: LCR Carrier Table to define the LCR Access Codes and
routing options. These options include Authorisation codes and Cost Centre
Conditions
The settings must comply with the requirements of the Indirect Carrier.
The operation of the @ symbol within the Access Code depend on the type of trunk. For
analogue trunk set as Dial Pulse the @ symbol defines change to DTMF dialling. For
ISDN trunks the @ symbol defines that a Connect Message is received and then DTMF
digits are sent in the B-Channel.
Feature Cross Reference
Least Cost Routing
Program 26 : ARS Service & Least Cost Routing
26-05: LCR Carrier Table
Level:
IN
Input Data
Carrier Table Number 1 ~ 25
Input Data
Item
No.
Item Input Data Default
01
Delete Digits
Enter the quantity of leading digits that
need to be deleted
0-16
0
02
Access Code
Enter the Access Code and Option to
route to the Indirect Carrier
Max 16 digits
(0-9,
, #, P, @)
P = Pause
@ = Change to DTMF or wait
for Connect
No setting
03
Authorisation Code Table
Enter the table number that contains the
correct Authorisation code.
0-10
(0= No Authorisation code)
0
04
Cost Centre Code
Optionally enter a cost centre code.
0- Not Used
1- Used
0
To Next Page
Loading...
