UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 881
Description
Use Program 90-13: System Information Output to define the output port to be
used as the system information output. The baud rate for the COM port should be set
in Program 10-21-02.
Conditions
None
Feature Cross Reference
None
Program 90 : Maintenance Program
90-13: System Information Output
Level:
IN
Input Data
Item
No.
Item Input Data Default
01
Output Port Type
Indicate the type of connection used to print the
system information.
0 = No Setting
4 = CTA/CTU
5 = USB
0
02
CTA Output Destination Extension Number
Up to eight digits
No Setting
04
Output Destination System ID
0~50
0
05
Output Command
Dial 1+ press Transfer
(Press Transfer to cancel.)
–
To Next Page
Loading...
