NEC Univerge SV8100 - 34-03: Trunk Group Routing for E&M Tie Lines

Issue 10.1 UNIVERGE SV8100
2 - 456 Program 34 : Tie Line Setup
Description
Use Program 34-03: Trunk Group Routing for E&M Tie Lines to assign the trunk
group route 1~8 or 1~100) chosen when a user seizes a Tie Line and dials 9. (Set
Trunk Group Routing in Program 14-07.) If the system has Automatic Route
Selection, dialing 9 accesses ARS. Make a separate entry for each Tie Line – for
each Night Service Mode.
Conditions
None
Feature Cross Reference
 Tie Lines
Program 34 : Tie Line Setup
34-03: Trunk Group Routing for E&M Tie Lines
Level:
IN
Input Data
Trunk Port Number 001~200
Day/Night Mode 1~8
Item No. Item Input Data Default
01
Route Table Number
0~100
(0 = No Setting)
1