NEC Univerge SV8100 - SIP-MLT CODEC Information Fixed Mode Setup

UNIVERGE SV8100 Issue 10.1
Programming Manual 2 - 835
Description
Use Program 84-29 : SIP-MLT CODEC Information Fixed Mode Setup to set the
CODEC data of the SIP-MLT when it uses Multicast.
Program 84 : Hardware Setup for VoIP
84-29 : SIP-MLT CODEC Information Fixed Mode Setup
Level:
IN
Index 1
Type 1 = Type 1 (Multicast)
2 = Type 2 (reserved)
3 = Type 3 (reserved)
4 = Type 4 (reserved)
5 = Type 5 (reserved)
Input Data
Item
No.
Item Input Data Default
01
Audio Capability
1 = G.711 A-law
2 = G.711 u-law
3 = G.729
4 = G.723
5 = G.722
1
02
Number of Audio Frames
1~6
1 = 10ms
2 = 20ms
3 = 30ms
4 = 40ms
5 = 50ms
6 = 60ms
2
03
RTP Filter
To avoid incorrect voice pass
connection, this Program checks
the sending side address from
received RTP packet at VoIPDB.
0 = Disable
1 = Enable
1