Issue 10.1 UNIVERGE SV8100
2 - 474 Program 35 : SMDR Account Code Setup
Description
Use Program 35-05: Account Code Setup to set various Account Code options for an
extension Class of Service. Assign a Class of Service to extensions in Program
20-06.
Program 35 : SMDR Account Code Setup
35-05: Account Code Setup
Level:
IN
Input Data
Class of Service Number 01~15
Item
No.
Item Input Data Default
01
Account Code Mode
Use this option to select the Account
Code Mode (0~3).
0 = Account Codes Disabled (None)
1 = Account Codes optional
2 = Account Codes Required but not
verified (No verify)
3 = Account Codes Required and
Verified (Verify)
0
02
Forced Account Code Toll Call
Setup
Use this option enable Account
Codes for all calls or just toll calls (for
mode 2 or 3 in Item 01 above).
0 = Account Codes for toll and local
calls (All)
1 = Account Codes just for toll calls
(STD)
0
03
Account Codes for Incoming Calls
Use this option to allow users to enter
Account Codes for incoming calls. If
disabled, any codes entered dial out
on the connected trunk.
0 = Account Codes for incoming calls
disabled (No)
1 = Account Codes for incoming calls
enabled (Yes)
0
04
Hiding Account Codes
Use this option to either hide or show
the Account codes on a telephone
display.
0 = Account Codes displayed
1 = Account Codes not displayed
0
To Next Page
Loading...
