Issue 10.1 UNIVERGE SV8100
2 - 122 Program 11 : System Numbering
Description
Use Program 11-16: Single Digit Service Code Setup to customize the one-digit
Service Codes used when a busy or ring back signal is heard. You can customize
additional Service Codes in Programs 11-10 ~ 11-15.
The following chart shows:
The number of each code (01~11).
The function of the Service Code.
The default entry. For example, dialing 1 (Item 03) when calling an extension
switches the call from either a voice or signal call (depending on how it is currently
defined).
Programs that may be affected by changing these codes.
Program 11 : System Numbering
11-16 : Single Digit Service Code Setup
Level:
IN
Input Data
Item
No.
Item
Default
(OT)
Default
(AU)
Related
Program
01
Step Call
No Setting 2 11-12-07
02
Barge-In
No Setting No Setting 11-12-08
03
Switching of Voice/Signal Call
1 1 11-12-06
04
Intercom Off-Hook Signaling
No Setting * 11-12-03
05
Camp-On
No Setting # 11-12-04
06
DND/Call Forward Override Bypass
No Setting No Setting 11-12-01
07
Message Waiting
No Setting 0 11-12-09
08
Voice Over
No Setting 6 11-12-41
09
Access to Voice Mail
No Setting 8 11-12-51
10
(Department) STG All Ring Mode
No Setting No Setting 11-12-09
16-01-05
11
Station Park Hold
No Setting No Setting 11-12-35
To Next Page
Loading...
