Issue 10.1 UNIVERGE SV8100
2 - 866 Program 90 : Maintenance Program
Description
(This program is available only via telephone programming and not through PC
Programming).
Use Program 90-08: System Reset to perform a system reset.
Conditions
After restoring a customer database, the system must be reset using Program
90-08 or by powering down/powering up before all the restored programming
takes affect.
Feature Cross Reference
None
Program 90 : Maintenance Program
90-08: System Reset
Level:
IN
Input Data
Item
No.
Item Input Data
01
System Reset
Dial 1 + press Transfer (Press Transfer key to cancel)
To Next Page
Loading...
