NEC Univerge SV8100 - 47-07 InMail Routing Mailbox Options

Issue 10.1 UNIVERGE SV8100
2 - 382 Program 24 : Hold/Transfer Setup
Description
Use Program 24-04 : Automatic Trunk-to-Trunk Transfer Target Setup to assign
the Speed Dialing number bin which should be used as the destination of the
Automatic Trunk-to-Trunk Transfer.
Conditions
None
Feature Cross Reference
 Call Forwarding, Off-Premise
Program 24 : Hold/Transfer Setup
24-04 : Automatic Trunk-to-Trunk Transfer Target Setup
Level:
IN
Input Data
Trunk Port Number 001~200
Day/Night Mode 1 ~ 8
Item
No.
Item Input Data Default
Related
Program
01
Speed Dial Area Number
The destination telephone number of the
Trunk-to-Trunk Transfer uses the number registered
into the Speed Dial. Use this program to setup the
Speed Dial Bin Number.
0~1999 1999 11-10-08
13-04
24-05